To pair your DIRECTV Stream remote with your device, follow these steps:
1. Turn on your TV and DIRECTV Stream device: Make sure your TV is on and your DIRECTV Stream device (like the streaming box or the DIRECTV Stream-enabled TV) is powered on.
2. Put the remote in pairing mode:
– Hold down the “Home” button on the remote for about 10 seconds until the LED light on the remote blinks twice.
– Alternatively, if your remote has a “Pairing” button, press and hold it until the LED blinks.
3. Wait for the pairing process:
– The remote should automatically detect your DIRECTV Stream device and pair with it.
– If pairing is successful, the LED on the remote will blink twice and turn off.
4. Test the remote:
– Try using the remote to control the volume, change channels, or navigate the interface to ensure it’s properly paired.
If pairing doesn’t work after following these steps, try the following:
– Make sure the remote’s batteries are fresh.
– Restart the DIRECTV Stream device and try pairing again.
– If you continue to have issues, refer to the user manual or DIRECTV customer support for further troubleshooting.
These steps generally apply to the DIRECTV Stream remote, but some minor variations may exist depending on the specific remote model.
