To pair your DIRECTV remote to your TV, follow these steps:
1. Turn on your TV
Make sure your TV is powered on before you start the pairing process.
2. Press and Hold the “TV” Button
On your DIRECTV remote, press and hold the “TV” button at the top of the remote until the green LED at the top of the remote lights up. The green light will stay on.
3. Press the “On/Off” Button
While holding the “TV” button, press and release the “On/Off” button. The green light should blink and then remain on.
4. Enter the Code for Your TV Brand
Now, you’ll need to enter a code that corresponds to your TV brand. The remote will automatically try to detect the correct code for your TV. Enter the 5-digit code for your TV brand. You can find these codes in the DIRECTV remote control manual or on the DIRECTV website.
If you don’t know the code, you can try using the DIRECTV remote’s code search method:
– Press and hold the “TV” button again until the green light stays on.
– Press and release the “Mute” button.
– Then press and release the “Enter” button.
– The green light will blink and turn off. Your remote will now begin searching for the correct code automatically.
5. Test the Remote
After entering the code or allowing the remote to search for the code, try using the remote to control the volume and power of your TV. If it works, the remote has been successfully paired.
6. If It Doesn’t Work
If the remote doesn’t work after entering the code, repeat the process and try a different code. You may need to use the code search method if you’re unsure of the specific code.
This should successfully pair your DIRECTV remote to your TV.
