To activate or set up your DIRECTV remote, follow these steps based on your receiver and remote model:
1. DirectV Remote Setup with a DIRECTV Receiver:
If you’re setting up a new remote or replacing an old one, you can follow these steps:
Step 1: Turn on the DIRECTV Receiver and TV
Make sure both your DIRECTV receiver and TV are powered on.
Step 2: Program the Remote
– For DIRECTV Genie remote (RC73 or RC74 model):
1. Press and hold the `MUTE` and `SELECT` buttons on the remote until the green light at the top of the remote blinks twice.
2. Release both buttons.
3. Enter the 5-digit code for your receiver. Typically, the code is 1-0-0-2 for most DIRECTV receivers.
4. If the code is correct, the green light will blink and then stay on.
5. Press the `PWR` button to test if it controls your TV power (if you want the remote to control both your DIRECTV receiver and your TV).
– For other DIRECTV remotes (like RC65, RC66, etc.):
1. Press and hold the `MUTE` and `ENTER` buttons at the same time until the green light at the top of the remote blinks twice.
2. Release the buttons.
3. Enter the 5-digit code that corresponds to your receiver or TV model. The code for most receivers is 1-0-0-2, but you can look up the specific code for your TV brand in the DIRECTV manual or online.
4. If the code is correct, the green light will blink and then stay on. Test your remote functions by adjusting volume, turning the TV on/off, etc.
2. Activate DIRECTV Remote via the DIRECTV App:
If you have a compatible smartphone or tablet, you can use the DIRECTV app to control your receiver remotely.
1. Download the DIRECTV app from the Apple App Store or Google Play Store.
2. Open the app and log in with your DIRECTV account credentials.
3. Navigate to the “Remote” section in the app and follow the on-screen instructions to control your DIRECTV receiver from your mobile device.
3. Troubleshooting
If the remote isn’t working after setup:
– Make sure the batteries are fresh and inserted correctly.
– Try reprogramming the remote using a different code.
– Ensure there are no obstructions between the remote and the receiver.
– Restart the DIRECTV receiver by unplugging it for 15 seconds and then plugging it back in.
Let me know if you need any additional help!
