To set your DIRECTV remote to control your TV, follow these steps:
1. Turn on your TV
Make sure your TV is powered on before starting the process.
2. Find the DIRECTV remote code
You need the correct code for your TV brand. You can find the codes in the DIRECTV remote manual, or use the DIRECTV website to look up the code for your TV model.
3. Program the remote
To program the DIRECTV remote to your TV, do the following:
– Step 1: Press and hold the “TV” button at the top of the remote until the red LED light stays on. Then, release the button.
– Step 2: Press and release the “Power” button. The red LED blinks and then stays on.
– Step 3: Enter the 5-digit TV code using the number buttons on the remote. After entering the code, the red LED will blink and turn off.
– Step 4: Test the remote. Try turning the TV off and adjusting the volume to ensure the remote is working. If it doesn’t work, repeat the steps with a different code.
4. Automatic Code Search (If the Code is Unknown)
If you don’t know the code for your TV brand, you can use the automatic code search feature:
– Step 1: Press and hold the “TV” button until the red LED stays on. Release the button.
– Step 2: Press and release the “Power” button (the red LED blinks and stays on).
– Step 3: Press and release the “Enter” button. The remote will begin searching for a compatible code. The LED will blink and then stay on.
– Step 4: When the TV turns off, press “Enter” to store the code.
5. Test the Remote
After programming, test the remote to make sure it works with your TV. If necessary, repeat the process or try a different code.
If you continue to have trouble, you can always refer to the DIRECTV website or customer service for assistance.
