To program a DIRECTV remote to a DIRECTV receiver, follow these steps:
1. Turn on your DIRECTV Receiver:
– Make sure your DIRECTV receiver is powered on.
2. Enter the Programming Mode on the Remote:
– On the DIRECTV remote, press and hold the “Mute” button and the “Select” button at the same time until the green light at the top of the remote blinks twice and stays on.
3. Enter the Receiver Code:
– With the green light on, press and release the “Channel Up” button. The green light should blink and then remain on.
– The remote will now begin searching for the correct code for your receiver. This process may take a few minutes.
4. Test the Remote:
– After the remote has completed the search, test the remote by pressing the “Power” button. If the receiver turns off, the remote is successfully programmed.
5. Exit the Programming Mode:
– Press the “Select” button to exit programming mode. The green light should turn off.
If the remote does not work after these steps, you may need to manually enter the correct code for your specific model. You can find the code in the DIRECTV remote manual or on the DIRECTV website.
