Using a DIRECTV remote control is fairly straightforward, but it depends on the specific model of remote you have. Below are general instructions on how to use a DIRECTV remote control to control your DIRECTV receiver and other devices, such as your TV or audio system:
1. Turning on the Devices
– TV: Press the “TV” button at the top of the remote, then press the “Power” button to turn your TV on.
– DIRECTV Receiver: Press the “Power” button on the remote while the remote is in “SAT” mode (press the “SAT” button to switch modes).
2. Changing Channels
– Press the “CH+” or “CH-” buttons to navigate up or down through channels.
– You can also directly enter the channel number using the number pad.
3. Volume Control
– To adjust the volume on your TV or audio system, press the “VOL+” or “VOL-” buttons.
– If you want to mute the volume, press the “MUTE” button.
4. Changing Modes (TV, Receiver, Audio System)
– Your DIRECTV remote can control multiple devices such as your TV, receiver, or audio system.
– To switch between modes, press the corresponding button at the top of the remote:
– SAT: Controls the DIRECTV receiver.
– TV: Controls the TV.
– AUD: Controls audio devices like soundbars or receivers.
– DVD: For controlling DVD or Blu-ray players (if applicable).
5. Using the Guide
– Press the “Guide” button to open the channel guide. Use the arrow keys to navigate through the guide and select programs.
6. Accessing the Menu
– Press the “Menu” button to open the main menu on your DIRECTV receiver.
– Use the arrow buttons to navigate the menu and the “Select” button to choose options.
7. Programing Your Remote
You may need to program your DIRECTV remote to control your TV or audio system. Here’s how:
1. Press and hold the “Select” and “Mute” buttons simultaneously until the green light at the top of the remote blinks twice.
2. Release the buttons, then press and release the “TV” button. The green light will blink and then remain on.
3. Enter the code for your TV or audio system. You can find the code in the DIRECTV remote control guide or look it up online.
4. After entering the code, press the “Enter” button. The green light will turn off, indicating the remote has been successfully programmed.
8. Troubleshooting
– If the remote isn’t working properly, make sure the batteries are fresh.
– Ensure that the remote is in the correct mode (SAT, TV, AUD) for the device you want to control.
– If programming a TV or audio system, double-check that you used the correct code.
These are the basic functions and steps for using a DIRECTV remote control. Depending on the model, there may be slight variations, but the core functions are similar across most devices.
