Programming a remote control for DirecTV can be done in several ways depending on the type of remote you have. Below are the general instructions for programming a DirecTV remote to control your DirecTV receiver and TV.
1. Program the Remote Using the On-Screen Setup (Most Common Method)
If you’re using a standard DirecTV remote, follow these steps to program it:
1. Turn on your TV and DirecTV receiver.
Make sure the DirecTV receiver is on and your TV is displaying the DirecTV menu or a channel.
2. Press and hold the ‘Menu’ button on the remote.
This will activate the on-screen menu.
3. Navigate to ‘Settings & Help’.
Use the arrow keys to navigate to “Settings & Help,” then select it.
4. Choose ‘Settings’.
In the settings menu, find the option labeled “Remote Control” or “Program Remote.”
5. Select ‘Program Remote’.
This will start the programming process.
6. Follow the on-screen prompts.
The remote will guide you through pairing steps, which may include pressing a series of buttons like ‘Select’, ‘Mute’, and the ‘TV’ button.
2. Manual Programming (Using the Code List)
If you don’t have the on-screen setup, you can program the remote manually using the code list that came with the remote or available on DirecTV’s website.
Here are the steps for manual programming:
1. Turn on your TV.
Make sure the TV is powered on.
2. Press and hold the ‘Mute’ and ‘Select’ buttons on the remote.
Hold them down until the green light on the remote blinks twice and then stays on.
3. Enter the 5-digit code for your TV brand.
You can find the code for your TV brand in the DirecTV code list. Enter the code using the remote’s number buttons.
4. Test the remote.
Press the ‘Power’ button to see if the TV turns off. If it does, your remote is programmed correctly. If not, repeat the process with another code for your brand or try a different method.
3. Auto-Search Method (If You Don’t Have the Code List)
If you don’t have a code list, you can use the auto-search method to find the right code for your TV.
1. Turn on your TV.
Make sure it is powered on.
2. Press and hold the ‘Mute’ and ‘Select’ buttons.
Hold them until the green light stays on (about 3 seconds), then release both buttons.
3. Press and release the ‘TV’ button.
The green light should blink and then remain on.
4. Press and release the ‘Power’ button.
The remote will begin searching for the correct code.
5. Wait for the TV to turn off.
The remote will try different codes, and when it finds the right one, the TV will turn off.
6. Press ‘Enter’ to save the code.
Once the TV turns off, press ‘Enter’ to save the code. The green light will blink twice and turn off.
4. Program the Remote to Control Other Devices
Once you’ve programmed your DirecTV remote to control your TV, you can also program it to control other devices, such as a sound system or DVD player. The process is similar—using a code list or auto-search function, depending on the device.
Troubleshooting Tips:
– If the remote isn’t working, try replacing the batteries or ensuring that you’re using the correct code for your TV or device.
– For Universal Remotes: If you’re using a universal remote or a different DirecTV model, the steps may vary slightly. Always refer to the manual for that specific model.
By following these steps, you should be able to successfully program your DirecTV remote to control your TV and other devices.
